Quote:
Originally Posted by da_guitarist
5. I always take something like a thin rag and a butter knife and pry the lights up. I insert the knife (with the rag btw the knife and paint) at the rear-most part of the car and somewhat gently pry the bulb casing forwards. Then the bulb twist locks out of the housing.
7. There is a chance that your SRT wheels would fit. They need to be 5x112 and as Chappy mentioned, offsets around 30-32 for the front and 35-37 rear. +/- a little could be ok. A test fit is the best way to find out.
9. Recommend eBay for the hood emblem. Around $30 is possible. Several styles available.
10. Could be plenty of things. Different compression ratio definitely calls for some changes. Adjustment to intake, tuning, and exhaust could add a few as well . If you're worried about it being more powerful, remember that ours weighs less 
. |
No, just seeing if we can upgrade the w208 for the extra 20hp. From using something specific from the w209.
Much like using an LS6 intake on pre-2001 LS1 f-bodys. Good bump in HP, in doing that.