Quote:
|
Originally Posted by ano0oj
I'm tired of using like 4 towels on like one wash. Where'd you get your sonus?
|
~One man’s opinion / observations~
You might want to try (dry) this-
Drying a Vehicle using water:
·Use a low-pressure, high volume water flow to `break' the surface tension of the water laying on the paint surface with the Ultimate Nozzle™ (or if you prefer remove the nozzle) you will see the water `sheet' off, move the hose down to "feed" the sheet as it flows down the panel, this will keep the `sheet' wide and it will carry away more water.
·The remaining water can be removed using a 24" x 30"waffle weave towel (Sonus Der Wunder Drying Towel, autopia.com) by pulling it across the panel or using a blotting motion, do not rub This gets rid of all the remaining drops and leaves only a little moisture, which can be removed with the towel.
·Use the blow side of a vacuum cleaner to remove water from crevices, wing mirrors, license plates, etc
·Use a water blade to remove water from glass surfaces
·Dry doorjambs, sill area, seams and crevices of hood and trunk with a Waffle Weave towel
~Hope this helps~
Knowledge unshared is experience wasted
justadumbarchitect / so I question everything/ Jon