CEL trouble codes

W208&203 · 11-06-2009, 11:18 PM

Just brought the car in to the shop to have the CEL checked out. They're telling me that the trouble codes are 010 and 036 and I need to replace the MAF and o2 sensors. They also quoted 800 + tax

Is this information correct? I searched around and couldn't find these particular codes.

TIA

To remove this ad, register today or login if you already are registered!

thepinoc · 11-06-2009, 11:26 PM

MAF and o2 sensors you can do it yourself, get a Haynes manual or something for your ride. You WILL save alot of money. MAF and o2 sensor i believe costs $350 total.

Here's a reputable site. http://www.autohausaz.com/mercedes-a...rts/index.html

E=MC^2 · 11-07-2009, 11:47 AM

The maf sensor will take you 4 minutes to replace it is very simple. The o2 is a little more difficult but with the right tools and a good manual you should be able to do it at home.

11-06-2009, 11:26 PM	#2
thepinoc Senior Member Join Date: Oct 2008 Location: SoCal, USA Posts: 250 Drives: 98 w202	MAF and o2 sensors you can do it yourself, get a Haynes manual or something for your ride. You WILL save alot of money. MAF and o2 sensor i believe costs $350 total. Here's a reputable site. http://www.autohausaz.com/mercedes-a...rts/index.html __________________ Clear Corner Turn Signals -- Chrome Bulb Turn Signals -- Avantgarde S600 Grille 6000k HID Low Beams -- 5000k HID Fog Lights -- 22% Front & 17% Rear Tint LED Tail Light Assemblies -- Superwhite LED Interior -- Superwhite LED Plate Lights LED Turn Signals -- Remus Sport Muffler -- K&N Air Filter -- Painted Calipers

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

11-07-2009, 11:47 AM	#3
E=MC^2 Member Join Date: Aug 2007 Location: st. paul minnesnowda Posts: 86 Drives: 1994 c280 totaled :( 1986 190e 2.3 16 valve	The maf sensor will take you 4 minutes to replace it is very simple. The o2 is a little more difficult but with the right tools and a good manual you should be able to do it at home.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)