Go Back   MBWorld.org Forums > Mercedes-Benz AMG Vehicles > C32 AMG, C55 AMG (W203)

C32 AMG, C55 AMG (W203) Discuss the C32 and C55 AMG.

Welcome to MBWorld.org!
Welcome to MBWorld,

You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!


Reply
 
LinkBack Thread Tools Search this Thread Rate Thread Display Modes
Old 07-26-2009, 01:02 PM   #26
MBWorld Fanatic!
 
c32AMG-DTM's Avatar
 
Join Date: Jun 2007
Location: Philadelphia, PA
Posts: 1,848
Drives: 2004 C32 AMG, 2002 C230K Coupe
Quote:
Originally Posted by mdncn2762 View Post
Redline Racing picked up the car today. Should be done on 29 or 30 JUL. Caught a glimpse of their new carbon intake on a E55. Looks sweet. Wish me luck...
Good luck!

Trust lots o' pics to follow, once you get 'er back...
To remove this ad, register today or login if you already are registered!

__________________
2002 C230K Coupe - silver/charcoal, premium package, wheel package
2004 C32 AMG - black/charcoal, COMAND, bixenons


Best ET: 13.205
Best MPH: 108.91

Best 60': 1.970
Best RT: 0.040
c32AMG-DTM is offline   Reply With Quote
Old 07-27-2009, 03:26 PM   #27
Super Member
 
mdncn2762's Avatar
 
Join Date: Jul 2006
Location: Ansbach, Germany
Posts: 552
Drives: 2002 C32, 2006 C230, 1991 100NX
Quote:
Originally Posted by c32AMG-DTM View Post
Good luck!

Trust lots o' pics to follow, once you get 'er back...
Thanks Brother. Lots of pics for sure.....
__________________
2002 C32
SprintBooster BDD451A2/ SL55 Intake and "Y"splitter/ K&N filters/ ASP Pulley/ H&R Sport Springs 52732/ NGK Iridium Plugs/ Phenolic Spacers and Washers/ LET ECU Tune/ IgnitionWires/ Johnson CM30p-7 pump/ Heat Exchanger (LET)/ Behr Radiator/ Rear Diffuser/ Flat Bottom Steering Wheel/ EBC Red Stuff/ Goodridge Lines/ 19'' Monolites

To install
Nothing
Ordered and/ or waiting
Red Line Carbon intake...If they ever finish it!!
Looking to buy:
Stuff
mdncn2762 is offline   Reply With Quote
Old 07-27-2009, 04:24 PM   #28
Super Member
 
Join Date: Jan 2006
Location: Houston, TX
Posts: 939
Drives: C32 Renntech
You need to aim for this look...



///AMG4EVER is offline   Reply With Quote
Old 07-28-2009, 12:04 AM   #29
Member
 
559EVO's Avatar
 
Join Date: Apr 2007
Location: Los Angeles
Posts: 187
Drives: 2003 E500
Downshift graffics sounds good as far as pricing, plus they do mobile service. I can have them stop by and do 2-3 cars in one shot plus a little extra for gas.
I had my old E500 done by stickercity.com, they also have pics of flat black cars in their gallery section.
__________________

2007 ML350 4MATIC [wifes)
2004 C240
2001 CBR929RR
2003 E500 TRADED FOR ML350
1995 YZF600R SOLD
2003 EVOVIII 450 HP SOLD
1998 C280 TRADED FOR E500
2000 ECLPSE GT left with X
1989 SUPRA TURBO SOLD
559EVO is offline   Reply With Quote
Old 07-29-2009, 03:48 PM   #30
Super Member
 
mdncn2762's Avatar
 
Join Date: Jul 2006
Location: Ansbach, Germany
Posts: 552
Drives: 2002 C32, 2006 C230, 1991 100NX
Quote:
Originally Posted by ///AMG4EVER View Post
You need to aim for this look...





Yea that looks good. Too many stickers in my opinion however. I need to get euro bumper strips now because the clear side markers stand out too much. Monolites are being powder coated as I write this. Decided not to carbon overlay the diffuser because of the speed I drive on the Autobahn. Here is a sneek peek of the car. I pick it up tomorrow.
Attached Images
File Type: jpg C32 BLACK REAR RIGHT.jpg (73.9 KB, 80 views)
File Type: jpg C32 BLACK REAR.jpg (81.9 KB, 91 views)
File Type: jpg C32 BLACK SIDE.jpg (75.1 KB, 91 views)
__________________
2002 C32
SprintBooster BDD451A2/ SL55 Intake and "Y"splitter/ K&N filters/ ASP Pulley/ H&R Sport Springs 52732/ NGK Iridium Plugs/ Phenolic Spacers and Washers/ LET ECU Tune/ IgnitionWires/ Johnson CM30p-7 pump/ Heat Exchanger (LET)/ Behr Radiator/ Rear Diffuser/ Flat Bottom Steering Wheel/ EBC Red Stuff/ Goodridge Lines/ 19'' Monolites

To install
Nothing
Ordered and/ or waiting
Red Line Carbon intake...If they ever finish it!!
Looking to buy:
Stuff
mdncn2762 is offline   Reply With Quote
Old 07-29-2009, 04:18 PM   #31
MBWorld Fanatic!
 
SilverBulletAMG's Avatar
 
Join Date: Aug 2006
Location: Keesler AFB, Gulfport, MS
Posts: 1,571
Drives: C32 AMG
Quote:
Originally Posted by mdncn2762 View Post
Yea that looks good. Too many stickers in my opinion however. I need to get euro bumper strips now because the clear side markers stand out too much. Monolites are being powder coated as I write this. Decided not to carbon overlay the diffuser because of the speed I drive on the Autobahn. Here is a sneek peek of the car. I pick it up tomorrow.
LOVE IT! Ugh....so lucky to have that available to you. It will really look sharp once your rims are done too. I would be all over that if I had that option here in the states for the price you paid. Almost makes me want to get stationed over there just to get this done...lol
__________________

DynoJet: 384whp/417wtq Mustang Dyno: 341whp/385wtq
VRP Headers - LET 185mm Pulley - LET Tune - C3P Intake - CM30 Pump - C3P HE - Phenolic Spacers - TVT Modified T-Stat - Green Filters - Magnaflow Front Cats - Resonator & Rear Cat Delete - H&R Springs - Denso IK22 Plugs - Magnecor 8.5mm Wires - Weltmeister Quad Exhaust - CF diffuser, spoiler, mirror covers - 18" AMG Turbine Rims
SilverBulletAMG is offline   Reply With Quote
Old 07-29-2009, 04:24 PM   #32
MBWorld Fanatic!
 
jturkel's Avatar
 
Join Date: Oct 2006
Location: Scottsdale, AZ
Posts: 3,753
Drives: 02 C32 AMG
Send a message via AIM to jturkel
wow that looks awesome
__________________
| 02 C32 AMG | SL55 Intake w/K&Ns | LET 185 Pulley | LET Tune | LET Heat Exchanger | Eurocharged Headers | Res Delete | NGK IX Iridiums | Magnecor KV85s | NW Pulley Saver | NW ISO Kit | Valentine1 | DashDyno SPD | CF Trunk Lip |

Waiting Install: NW oil catch can
Next: secondary cat delete, retune, coolant reservoir, intake/tb project, hooley button


jturkel is online now   Reply With Quote
Old 07-29-2009, 04:33 PM   #33
MBWorld Fanatic!
 
c32AMG-DTM's Avatar
 
Join Date: Jun 2007
Location: Philadelphia, PA
Posts: 1,848
Drives: 2004 C32 AMG, 2002 C230K Coupe
Quote:
Originally Posted by jturkel View Post
wow that looks awesome
+1

Very "stealth-fighter"ish. What color are the monolites being powdercoated, mdncn?
__________________
2002 C230K Coupe - silver/charcoal, premium package, wheel package
2004 C32 AMG - black/charcoal, COMAND, bixenons


Best ET: 13.205
Best MPH: 108.91

Best 60': 1.970
Best RT: 0.040
c32AMG-DTM is offline   Reply With Quote
Old 07-29-2009, 04:48 PM   #34
Super Member
 
mdncn2762's Avatar
 
Join Date: Jul 2006
Location: Ansbach, Germany
Posts: 552
Drives: 2002 C32, 2006 C230, 1991 100NX
Quote:
Originally Posted by SilverBulletAMG View Post
LOVE IT! Ugh....so lucky to have that available to you. It will really look sharp once your rims are done too. I would be all over that if I had that option here in the states for the price you paid. Almost makes me want to get stationed over there just to get this done...lol
Dont forget the German beer and Autobahn. Also good reasons to be stationed here. Thanks
__________________
2002 C32
SprintBooster BDD451A2/ SL55 Intake and "Y"splitter/ K&N filters/ ASP Pulley/ H&R Sport Springs 52732/ NGK Iridium Plugs/ Phenolic Spacers and Washers/ LET ECU Tune/ IgnitionWires/ Johnson CM30p-7 pump/ Heat Exchanger (LET)/ Behr Radiator/ Rear Diffuser/ Flat Bottom Steering Wheel/ EBC Red Stuff/ Goodridge Lines/ 19'' Monolites

To install
Nothing
Ordered and/ or waiting
Red Line Carbon intake...If they ever finish it!!
Looking to buy:
Stuff

Last edited by mdncn2762; 07-30-2009 at 04:18 AM. Reason: added an s
mdncn2762 is offline   Reply With Quote
Old 07-29-2009, 04:51 PM   #35
MBWorld Fanatic!
 
jturkel's Avatar
 
Join Date: Oct 2006
Location: Scottsdale, AZ
Posts: 3,753
Drives: 02 C32 AMG
Send a message via AIM to jturkel
Quote:
Originally Posted by c32AMG-DTM View Post
+1

Very "stealth-fighter"ish. What color are the monolites being powdercoated, mdncn?
great way to describe it......we got a stealth-fighter jet on our hands now



....i am seriously impressed as to how amazing the car looks like that
__________________
| 02 C32 AMG | SL55 Intake w/K&Ns | LET 185 Pulley | LET Tune | LET Heat Exchanger | Eurocharged Headers | Res Delete | NGK IX Iridiums | Magnecor KV85s | NW Pulley Saver | NW ISO Kit | Valentine1 | DashDyno SPD | CF Trunk Lip |

Waiting Install: NW oil catch can
Next: secondary cat delete, retune, coolant reservoir, intake/tb project, hooley button


jturkel is online now   Reply With Quote
Old 07-29-2009, 04:53 PM   #36
Super Member
 
mdncn2762's Avatar
 
Join Date: Jul 2006
Location: Ansbach, Germany
Posts: 552
Drives: 2002 C32, 2006 C230, 1991 100NX
Quote:
Originally Posted by jturkel View Post
wow that looks awesome
Thanks

Quote:
Originally Posted by c32AMG-DTM View Post
+1

Very "stealth-fighter"ish. What color are the monolites being powdercoated, mdncn?
Thanks....Same as car

Appreciate it. What else would you guys do?

Im thinking about front lips, sunroof and trunk spoilers? Any suggestions?
__________________
2002 C32
SprintBooster BDD451A2/ SL55 Intake and "Y"splitter/ K&N filters/ ASP Pulley/ H&R Sport Springs 52732/ NGK Iridium Plugs/ Phenolic Spacers and Washers/ LET ECU Tune/ IgnitionWires/ Johnson CM30p-7 pump/ Heat Exchanger (LET)/ Behr Radiator/ Rear Diffuser/ Flat Bottom Steering Wheel/ EBC Red Stuff/ Goodridge Lines/ 19'' Monolites

To install
Nothing
Ordered and/ or waiting
Red Line Carbon intake...If they ever finish it!!
Looking to buy:
Stuff
mdncn2762 is offline   Reply With Quote
Old 07-29-2009, 04:54 PM   #37
Super Member
 
Join Date: Jan 2006
Location: Houston, TX
Posts: 939
Drives: C32 Renntech
Wow! It turned out great!
///AMG4EVER is offline   Reply With Quote
Old 07-29-2009, 05:00 PM   #38
MBWorld Fanatic!
 
jturkel's Avatar
 
Join Date: Oct 2006
Location: Scottsdale, AZ
Posts: 3,753
Drives: 02 C32 AMG
Send a message via AIM to jturkel
matching trunk spoiler might look super sleek.....

if you want to get super picky about look, im debating whether i would like your side markers clear or matching better? I really can't decide.

only other thing i could think of really is maybe (just maybe) the rieger front bumper? though that would be a PITA b/c they would have to redo (more money) the bumper?

http://formymercedes.com/mb_results....r%20Body%20Kit

idk.....just thoughts flowing. you can take 'em....or throw 'em right back lol.
__________________
| 02 C32 AMG | SL55 Intake w/K&Ns | LET 185 Pulley | LET Tune | LET Heat Exchanger | Eurocharged Headers | Res Delete | NGK IX Iridiums | Magnecor KV85s | NW Pulley Saver | NW ISO Kit | Valentine1 | DashDyno SPD | CF Trunk Lip |

Waiting Install: NW oil catch can
Next: secondary cat delete, retune, coolant reservoir, intake/tb project, hooley button


jturkel is online now   Reply With Quote
Old 07-29-2009, 05:40 PM   #39
Super Member
 
mdncn2762's Avatar
 
Join Date: Jul 2006
Location: Ansbach, Germany
Posts: 552
Drives: 2002 C32, 2006 C230, 1991 100NX
Quote:
Originally Posted by jturkel View Post
matching trunk spoiler might look super sleek.....

if you want to get super picky about look, im debating whether i would like your side markers clear or matching better? I really can't decide.

only other thing i could think of really is maybe (just maybe) the rieger front bumper? though that would be a PITA b/c they would have to redo (more money) the bumper?

http://formymercedes.com/mb_results....r%20Body%20Kit

idk.....just thoughts flowing. you can take 'em....or throw 'em right back lol.
I was thinking the same thing about the bumper cover. I was planning on getting this one from a dealer here but, I dont know, just never got back in contact with them. I like the Rieger one too.
Attached Images
File Type: jpg SWEET.jpg (74.3 KB, 52 views)
__________________
2002 C32
SprintBooster BDD451A2/ SL55 Intake and "Y"splitter/ K&N filters/ ASP Pulley/ H&R Sport Springs 52732/ NGK Iridium Plugs/ Phenolic Spacers and Washers/ LET ECU Tune/ IgnitionWires/ Johnson CM30p-7 pump/ Heat Exchanger (LET)/ Behr Radiator/ Rear Diffuser/ Flat Bottom Steering Wheel/ EBC Red Stuff/ Goodridge Lines/ 19'' Monolites

To install
Nothing
Ordered and/ or waiting
Red Line Carbon intake...If they ever finish it!!
Looking to buy:
Stuff
mdncn2762 is offline   Reply With Quote
Old 07-29-2009, 06:03 PM   #40
MBWorld Fanatic!
 
SilverBulletAMG's Avatar
 
Join Date: Aug 2006
Location: Keesler AFB, Gulfport, MS
Posts: 1,571
Drives: C32 AMG
Quote:
Originally Posted by mdncn2762 View Post
What else would you guys do?

Im thinking about front lips, sunroof and trunk spoilers? Any suggestions?
Get a quad exhaust to put that diffuser to good use. Trunk and front spoiler. Tint the windows as much as you can over there. Smoked out LED tails. Black bi-x headlights. Blacked out front grill. Then trade me cars.
__________________

DynoJet: 384whp/417wtq Mustang Dyno: 341whp/385wtq
VRP Headers - LET 185mm Pulley - LET Tune - C3P Intake - CM30 Pump - C3P HE - Phenolic Spacers - TVT Modified T-Stat - Green Filters - Magnaflow Front Cats - Resonator & Rear Cat Delete - H&R Springs - Denso IK22 Plugs - Magnecor 8.5mm Wires - Weltmeister Quad Exhaust - CF diffuser, spoiler, mirror covers - 18" AMG Turbine Rims
SilverBulletAMG is offline   Reply With Quote
Old 07-29-2009, 06:07 PM   #41
MBWorld Fanatic!
 
SilverBulletAMG's Avatar
 
Join Date: Aug 2006
Location: Keesler AFB, Gulfport, MS
Posts: 1,571
Drives: C32 AMG
Quote:
Originally Posted by mdncn2762 View Post
I was thinking the same thing about the bumper cover. I was planning on getting this one from a dealer here but, I dont know, just never got back in contact with them. I like the Rieger one too.
Would that bumper fit our cars? Thought that was only for the CLKs and could work on the 55s since they have the same front.

Rieger would work on ours of course but I don't think you need it. I would not go with the roof or sunroof spoiler. Never been a fan but that's just me.
__________________

DynoJet: 384whp/417wtq Mustang Dyno: 341whp/385wtq
VRP Headers - LET 185mm Pulley - LET Tune - C3P Intake - CM30 Pump - C3P HE - Phenolic Spacers - TVT Modified T-Stat - Green Filters - Magnaflow Front Cats - Resonator & Rear Cat Delete - H&R Springs - Denso IK22 Plugs - Magnecor 8.5mm Wires - Weltmeister Quad Exhaust - CF diffuser, spoiler, mirror covers - 18" AMG Turbine Rims
SilverBulletAMG is offline   Reply With Quote
Old 07-29-2009, 06:37 PM   #42
Member
 
Join Date: May 2009
Location: Costa Mesa, CA
Posts: 229
Drives: 1999 E320
...quote : "Ok guys so this is kind of funny.. i was looking on craigslist the other day and I saw this people who can vinal your roof in either flat black or glossy black.
he has his own website.
Spoke to the guy and he is in SOCAL! His prices are amazing!!
here is the guy
Tell him you know Nico Clavijo.
He will hook you guys up.
Daniel Sanchez

909.241.1351

www.downshiftgraphics.com

I am getting the roof done on mine. So i'll post pics when its done! "

...Ha Ha,, yeah man, they drove from the IE to my place in OC and wrapped my roof in black (sorry no pics yet)- AWESOME prices - tell him Kris said what's up and thanks.

nelson09 is offline   Reply With Quote
Old 07-29-2009, 06:48 PM   #43
MBWorld Fanatic!
 
c32AMG-DTM's Avatar
 
Join Date: Jun 2007
Location: Philadelphia, PA
Posts: 1,848
Drives: 2004 C32 AMG, 2002 C230K Coupe
IDK if the wheels matching will look good or not... but style's very personal. IMHO, I've seen matte black cars with glossy black wheels and thought it looked amazing - YMMV. EDIT: Full disclosure, I usually don't like color matched wheels on any car - I've seen red/yellow/green/white/etc. exotics with color matched wheels - usually don't prefer that look (to say the least).

If you go for a lip and/or trunk spoiler, I'd try to find a dry CF version... that'd look great with your new look.
__________________
2002 C230K Coupe - silver/charcoal, premium package, wheel package
2004 C32 AMG - black/charcoal, COMAND, bixenons


Best ET: 13.205
Best MPH: 108.91

Best 60': 1.970
Best RT: 0.040

Last edited by c32AMG-DTM; 07-29-2009 at 06:50 PM.
c32AMG-DTM is offline   Reply With Quote
Old 07-29-2009, 07:20 PM   #44
Out Of Control!!
 
FrankW's Avatar
 
Join Date: Apr 2002
Location: Diamond Bar, CA
Posts: 19,294
Drives: DirtyToo & Thrifty
Quote:
Originally Posted by mdncn2762 View Post
Yea that looks good. Too many stickers in my opinion however. I need to get euro bumper strips now because the clear side markers stand out too much. Monolites are being powder coated as I write this. Decided not to carbon overlay the diffuser because of the speed I drive on the Autobahn. Here is a sneek peek of the car. I pick it up tomorrow.
wow...i'm jealous
FrankW is online now   Reply With Quote
Old 07-30-2009, 06:24 PM   #45
Super Member
 
mdncn2762's Avatar
 
Join Date: Jul 2006
Location: Ansbach, Germany
Posts: 552
Drives: 2002 C32, 2006 C230, 1991 100NX
Picked up the car today. It looks much better and much more evil in person. Ill take pics tomorrow.


Quote:
Originally Posted by SilverBulletAMG View Post
Get a quad exhaust to put that diffuser to good use. Trunk and front spoiler. Tint the windows as much as you can over there. Smoked out LED tails. Black bi-x headlights. Blacked out front grill. Then trade me cars.
Quads...for sure. I havent found any muffler shops over here yet. Im looking believe me. Spoilers and tails are in the works. Window tints. German law says no front tinting. Only the three rears can be tinted. Trade cars...the wife would kill me. I just spent her hair and nails money. J/K


Quote:
Originally Posted by SilverBulletAMG View Post
Would that bumper fit our cars? Thought that was only for the CLKs and could work on the 55s since they have the same front.

Rieger would work on ours of course but I don't think you need it. I would not go with the roof or sunroof spoiler. Never been a fan but that's just me.
That bumper cover fits. I met with the owner personally.

Quote:
Originally Posted by c32AMG-DTM View Post
IDK if the wheels matching will look good or not... but style's very personal. IMHO, I've seen matte black cars with glossy black wheels and thought it looked amazing - YMMV. EDIT: Full disclosure, I usually don't like color matched wheels on any car - I've seen red/yellow/green/white/etc. exotics with color matched wheels - usually don't prefer that look (to say the least).


If you go for a lip and/or trunk spoiler, I'd try to find a dry CF version... that'd look great with your new look.
The stock wheels (silver) look horrible with the flat black. What about flat black wheels with red racing stripe? Whats dry carbon? Is that an appearance thing?

Quote:
Originally Posted by FrankW View Post
wow...i'm jealous
Dude im jealous. I have a stack of mags by the sh!tter, LOL, and every now and again I read about YOUR car in Traction magazine. May/ Jun 2008 PG 69...69
__________________
2002 C32
SprintBooster BDD451A2/ SL55 Intake and "Y"splitter/ K&N filters/ ASP Pulley/ H&R Sport Springs 52732/ NGK Iridium Plugs/ Phenolic Spacers and Washers/ LET ECU Tune/ IgnitionWires/ Johnson CM30p-7 pump/ Heat Exchanger (LET)/ Behr Radiator/ Rear Diffuser/ Flat Bottom Steering Wheel/ EBC Red Stuff/ Goodridge Lines/ 19'' Monolites

To install
Nothing
Ordered and/ or waiting
Red Line Carbon intake...If they ever finish it!!
Looking to buy:
Stuff
mdncn2762 is offline   Reply With Quote
Old 07-31-2009, 12:59 AM   #46
Member
 
Join Date: Oct 2008
Posts: 215
Drives: 2005 C55 AMG
Dry carbon fiber is an appearance thing yes, its basically matte carbon fiber, rather than shiny. Your car looks amazing now, definitely go dual exhaust though.

I would see how the powdercoated rims look before adding the stripe, I tend to agree with your thought though, it might be too much flat black if the rims are just plain.

Can't wait to see it once you finish the exhaust, and get the remaining exterior parts on there (lip etc.)
__________________
willc55 is offline   Reply With Quote
Old 07-31-2009, 04:29 AM   #47
Out Of Control!!
 
FrankW's Avatar
 
Join Date: Apr 2002
Location: Diamond Bar, CA
Posts: 19,294
Drives: DirtyToo & Thrifty
Quote:
Originally Posted by willc55 View Post
Dry carbon fiber is an appearance thing yes, its basically matte carbon fiber, rather than shiny. Your car looks amazing now, definitely go dual exhaust though.

I would see how the powdercoated rims look before adding the stripe, I tend to agree with your thought though, it might be too much flat black if the rims are just plain.

Can't wait to see it once you finish the exhaust, and get the remaining exterior parts on there (lip etc.)
dry CF is not just for appearance. they're a lot lighter than wet CF.
FrankW is online now   Reply With Quote
Old 07-31-2009, 12:10 PM   #48
Member
 
Join Date: Oct 2008
Posts: 215
Drives: 2005 C55 AMG
Quote:
Originally Posted by FrankW View Post
dry CF is not just for appearance. they're a lot lighter than wet CF.
Wow, I didn't know that, does that also make dry CF more expensive?
__________________
willc55 is offline   Reply With Quote
Old 07-31-2009, 12:15 PM   #49
Senior Member
 
Join Date: Nov 2005
Location: Ashland, KY USA
Posts: 300
Drives: Mercedes C32 AMG 2003
Dark Model

The flat black has that Ducati Dark look, kind of menacing, certainly different - way better than the usual silver. I would not do it to my car but it is a personal taste thing. If you like it, that is all that matters. Once thought and something that I was looking at anyway is rather than delete the Tri-Star and blacking out the badges, have you considered having then "Black Chromed"? That is a black glossy finish that is badassed looing and would set off your blacked out AMG without being bright or too gaudy. Its a classy look. Do all the badges and the exhaust tips and grille.

BTW: do you have any contact info. for the tuner guy in Munich? I would like to develop contact with a Germany based AMG tuner just to see if I can source some cool stuff, plus I do some work in Switzerland and Germany from time to time and wanted to try to network with them. Good luck with the project. Pics...

Irish
JG26_Irish is offline   Reply With Quote
Old 08-01-2009, 03:57 PM   #50
Super Member
 
mdncn2762's Avatar
 
Join Date: Jul 2006
Location: Ansbach, Germany
Posts: 552
Drives: 2002 C32, 2006 C230, 1991 100NX
As im sitting here listening to Slayer and having just finished my third bloody Mary I thought I would recap todays events. I installed my new rotors/ Goodridge lines and EBC pads on the C32.
Everything went pretty smooth except for I stripped the rear right caliper bolts that bolt to the knuckle? Hub? not sure what its called. Anyone have a schematic of the right rear caliper area? I took it easy back to the house from the car craft center on post. Didnt even get to bed the pads. Anyway here are pics of the recent Murdered Out plan. More to follow...Enjoy!!!
Attached Images
File Type: jpg IMG_1242.jpg (48.7 KB, 52 views)
File Type: jpg IMG_1241.jpg (62.8 KB, 51 views)
File Type: jpg IMG_1236.jpg (83.4 KB, 73 views)
File Type: jpg IMG_1225.jpg (59.8 KB, 47 views)
File Type: jpg IMG_1237.jpg (75.2 KB, 54 views)
File Type: jpg IMG_1224.jpg (71.0 KB, 41 views)
__________________
2002 C32
SprintBooster BDD451A2/ SL55 Intake and "Y"splitter/ K&N filters/ ASP Pulley/ H&R Sport Springs 52732/ NGK Iridium Plugs/ Phenolic Spacers and Washers/ LET ECU Tune/ IgnitionWires/ Johnson CM30p-7 pump/ Heat Exchanger (LET)/ Behr Radiator/ Rear Diffuser/ Flat Bottom Steering Wheel/ EBC Red Stuff/ Goodridge Lines/ 19'' Monolites

To install
Nothing
Ordered and/ or waiting
Red Line Carbon intake...If they ever finish it!!
Looking to buy:
Stuff
mdncn2762 is offline   Reply With Quote
Reply

Tags
benz, blacked, c32, car, cars, cost, downshiftgraphics, forum, forums, mercedes, mobsters, murdered, murdering, myspace, rims


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off



All times are GMT -4. The time now is 09:52 PM.


Advertise on MBWorld.org - Terms of Service - Privacy Policy - Jobs
Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.3.0
Copyright © 2001-2008 InternetBrands, Inc. / MBWorld.org. All Rights Reserved.