W202 AMG Picture Thread - Page 2

Denlasoul · 01-25-2003, 11:26 PM

Quote:

Originally posted by TheBeast
what kind of drop does your car have on it. Because your car looks Sexy. lol. And i been diein to get those two-tone seats. cuzz it makes the car look so much better.

Me? I believe it is a 1.5 inch drop on the #1(F) / #2(R) pads. Also on 18 inch Mono's.

To remove this ad, register today or login if you already are registered!

moedigga · 01-27-2003, 10:54 AM

hey this question is for denlasoul, Are those 18x8 18 x9 monos? Did you have any problems with rubbing before or after the suspension drop? Im getting my 18 monos put on today and the drop is the next thing on my mind any info appreciated.

TheBeast · 01-27-2003, 03:49 PM

yaa thankz Denlasoul for the info. i probably gonna get the same type of drop on mine. i hope you dont tihnk im bittin off you or nothing, but i tihnk its the best way to go. Thankz

jbiZzyC43 · 01-28-2003, 02:33 PM

Hey Denlasoul, did you have any camber problems after the drop, or did a simple alignment correct everything? I just want to know if you needed a camber correction kit or not. After the drop, is there a lot of negative camber in the rear? Thanks for any info. By the way, nice car. I have the exact same car as you, and you did yours exactly the way I would do mine.

M104-AMG · 02-03-2003, 02:55 PM

How about my C36 engine & tranny, diff, and brakes in a W124 wagon?

:-) neil
1988 360TE AMG
1993 500E

C43AML · 02-03-2003, 09:52 PM

Side view of my 2000 C43

C43AML · 02-03-2003, 09:53 PM

Quarter shot view

C43AML · 02-03-2003, 09:54 PM

My 'Shine Your Light On Me' shot..

hundebesitzer · 02-04-2003, 11:24 AM

this is the new feature of my car:

C43AML · 02-23-2003, 04:09 PM

My 2000 C43 with my new Carlsson 2/5 rims from Tire Rack (Thanks Luke)!

C43AML · 02-23-2003, 04:15 PM

My 2000 C43 with my new Carlsson 2/5 rims from Tire Rack (Thanks Luke)!

C43AML · 02-23-2003, 04:17 PM

My 2000 C43 with my new Carlsson 2/5 rims from Tire Rack (Thanks Luke) !

C43AML · 02-23-2003, 04:19 PM

My 2000 C43 with my new Carlsson 2/5 rims from Tire Rack (Thanks Luke)

C43AML · 02-23-2003, 04:20 PM

My 2000 C43 with my new Carlsson 2/5 rims from Tire Rack

joboo · 03-02-2003, 09:52 PM

Damn that c43 looks tight!!! Are those 18 or 19" wheels? what tire size did you elect to go with?

suspension king · 03-03-2003, 12:17 AM

The C43 is probably the best buy.
out of the box a good car .
also if you need more power try sliping 55 motor in .
nothing else is needed. you can find them in scrap yards around the us for cheep. also no one will know unless you tell them , the motor onece inside the chassie look exatley the same you will even fool the smog people because tail pipe emissions are the same.
I just finished one it flys

C43AML · 03-03-2003, 01:15 AM

The wheels are 18" with 240 width tires in front and 255 in back. I originally had 265's in the back, but they rubbed quite badly and had to replace them with 255's. Also, any rims larger than 18" will require fender rolling, which I don't want to do because this is a lease vehicle.

Richard Wang · 03-06-2003, 09:42 PM

finally take some pic with my car

Richard Wang · 03-06-2003, 09:46 PM

side pic with my 18' brabus monoblock 5.225/40/18 front and 255/35/18 rear so3 all the way

Richard Wang · 03-06-2003, 09:48 PM

forgot the attach the pic

Richard Wang · 03-06-2003, 09:50 PM

i just love the mean ass look ....

Richard Wang · 03-06-2003, 09:53 PM

Richard Wang · 03-06-2003, 09:57 PM

something nice to have ......

Richard Wang · 03-06-2003, 09:59 PM

something nice to have ......:p

toamend · 03-10-2003, 11:44 AM

RW,
Nice Mac install, I've been considering same. How much of a pain in the ass was it? I assume you through everything stock away and replaced all of the components?
WS

02-03-2003, 02:55 PM	#30
M104-AMG Member Join Date: Oct 2002 Location: FL Posts: 92 Drives: W124 E36T AMG; W124 500E	Does a C36 engine/tranny in a W124 count? How about my C36 engine & tranny, diff, and brakes in a W124 wagon? :-) neil 1988 360TE AMG 1993 500E

02-03-2003, 09:52 PM	#31
C43AML Almost a Member! Join Date: Feb 2003 Location: North Carolina Posts: 33 Drives: 2000 C43	Pic of my 2000 C43 with 18" rims and Eibach springs Side view of my 2000 C43

02-03-2003, 09:53 PM	#32
C43AML Almost a Member! Join Date: Feb 2003 Location: North Carolina Posts: 33 Drives: 2000 C43	Pic of my 2000 C43 with 18" rims and Eibach springs Quarter shot view

02-03-2003, 09:54 PM	#33
C43AML Almost a Member! Join Date: Feb 2003 Location: North Carolina Posts: 33 Drives: 2000 C43	Pic of my 2000 C43 with 18" rims and Eibach springs My 'Shine Your Light On Me' shot..

02-04-2003, 11:24 AM	#34
hundebesitzer Newbie Join Date: Dec 2002 Posts: 3	addon for my c43 t this is the new feature of my car:

01-27-2003, 10:54 AM	#27
moedigga Member Join Date: Dec 2002 Location: Columbia,SC Posts: 184 Drives: C43	hey this question is for denlasoul, Are those 18x8 18 x9 monos? Did you have any problems with rubbing before or after the suspension drop? Im getting my 18 monos put on today and the drop is the next thing on my mind any info appreciated.

01-27-2003, 03:49 PM	#28
TheBeast Newbie Join Date: Aug 2002 Location: Newark NJ Posts: 24 Drives: C36 AMG	yaa thankz Denlasoul for the info. i probably gonna get the same type of drop on mine. i hope you dont tihnk im bittin off you or nothing, but i tihnk its the best way to go. Thankz

01-28-2003, 02:33 PM	#29
jbiZzyC43 Almost a Member! Join Date: Nov 2002 Location: Sacramento Posts: 38 Drives: 1998 C43 AMG	Hey Denlasoul, did you have any camber problems after the drop, or did a simple alignment correct everything? I just want to know if you needed a camber correction kit or not. After the drop, is there a lot of negative camber in the rear? Thanks for any info. By the way, nice car. I have the exact same car as you, and you did yours exactly the way I would do mine.

02-23-2003, 04:09 PM	#35
C43AML Almost a Member! Join Date: Feb 2003 Location: North Carolina Posts: 33 Drives: 2000 C43	My 2000 C43 My 2000 C43 with my new Carlsson 2/5 rims from Tire Rack (Thanks Luke)!

02-23-2003, 04:15 PM	#36
C43AML Almost a Member! Join Date: Feb 2003 Location: North Carolina Posts: 33 Drives: 2000 C43	My 2000 C43 My 2000 C43 with my new Carlsson 2/5 rims from Tire Rack (Thanks Luke)!

02-23-2003, 04:17 PM	#37
C43AML Almost a Member! Join Date: Feb 2003 Location: North Carolina Posts: 33 Drives: 2000 C43	My 2000 C43 My 2000 C43 with my new Carlsson 2/5 rims from Tire Rack (Thanks Luke) !

02-23-2003, 04:19 PM	#38
C43AML Almost a Member! Join Date: Feb 2003 Location: North Carolina Posts: 33 Drives: 2000 C43	My 2000 C43 My 2000 C43 with my new Carlsson 2/5 rims from Tire Rack (Thanks Luke)

02-23-2003, 04:20 PM	#39
C43AML Almost a Member! Join Date: Feb 2003 Location: North Carolina Posts: 33 Drives: 2000 C43	My 2000 C43 My 2000 C43 with my new Carlsson 2/5 rims from Tire Rack

03-02-2003, 09:52 PM	#40
joboo Almost a Member! Join Date: Oct 2002 Posts: 55	Damn that c43 looks tight!!! Are those 18 or 19" wheels? what tire size did you elect to go with?

03-03-2003, 12:17 AM	#41
suspension king Almost a Member! Join Date: Feb 2003 Location: los angeles Posts: 40 Drives: what ever I like	C43 power The C43 is probably the best buy. out of the box a good car . also if you need more power try sliping 55 motor in . nothing else is needed. you can find them in scrap yards around the us for cheep. also no one will know unless you tell them , the motor onece inside the chassie look exatley the same you will even fool the smog people because tail pipe emissions are the same. I just finished one it flys

03-03-2003, 01:15 AM	#42
C43AML Almost a Member! Join Date: Feb 2003 Location: North Carolina Posts: 33 Drives: 2000 C43	My 2000 C43 The wheels are 18" with 240 width tires in front and 255 in back. I originally had 265's in the back, but they rubbed quite badly and had to replace them with 255's. Also, any rims larger than 18" will require fender rolling, which I don't want to do because this is a lease vehicle.

03-06-2003, 09:42 PM	#43
Richard Wang Newbie Join Date: Feb 2003 Posts: 11	my babe !!! finally take some pic with my car

03-06-2003, 09:46 PM	#44
Richard Wang Newbie Join Date: Feb 2003 Posts: 11	here is another one side pic with my 18' brabus monoblock 5.225/40/18 front and 255/35/18 rear so3 all the way

03-06-2003, 09:48 PM	#45
Richard Wang Newbie Join Date: Feb 2003 Posts: 11	ops forgot the attach the pic

03-06-2003, 09:50 PM	#46
Richard Wang Newbie Join Date: Feb 2003 Posts: 11	another one i just love the mean ass look ....

03-06-2003, 09:53 PM	#47
Richard Wang Newbie Join Date: Feb 2003 Posts: 11	rear view

03-06-2003, 09:57 PM	#48
Richard Wang Newbie Join Date: Feb 2003 Posts: 11	my stearo something nice to have ......

03-06-2003, 09:59 PM	#49
Richard Wang Newbie Join Date: Feb 2003 Posts: 11	my stearo something nice to have ......:p

03-10-2003, 11:44 AM	#50
toamend Almost a Member! Join Date: Aug 2002 Location: West Palm Beach Posts: 66 Drives: 99 C43	RW, Nice Mac install, I've been considering same. How much of a pain in the ass was it? I assume you through everything stock away and replaced all of the components? WS __________________ 1999 C43

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: