Cams Again

PTE · 12-18-2007, 04:09 PM

Hi Guy's :
I've got a set of SLR cams Copys. They will drop right in a 5.5 N/A - M 113 motor. No adjustments need. These cams have dyno time only and about 200 miles on them so the ECU could adapt. Intake lift is .309" & exhaust lift is .295". The idle is smooth on loss of any bottom end torque and with help that rpm lag between 5200 & 5800 rpm band. I'll ship them for $2400.00 ___PTE___

To remove this ad, register today or login if you already are registered!

baldurann · 12-19-2007, 09:18 PM

Did you have the cams custom ground? If so, who did you have grind them? Thanks!

PTE · 12-19-2007, 10:24 PM

No ,They were VRP 1st gen. I believe they were built by Piper Cams .UK. They are not Schrick Cams ___PTE___

baldurann · 12-19-2007, 10:56 PM

Damn, was hoping to get pointed in the right direction to get a custom set ground. Thanks, though!

jordanst2 · 12-24-2007, 09:59 PM

what kind of gains can be expected from these?

12-19-2007, 10:24 PM	#3
PTE Super Member Join Date: Jul 2005 Location: S.E. FLA. Posts: 748 Drives: 03 CLK5.5 AMG	Cams!! No ,They were VRP 1st gen. I believe they were built by Piper Cams .UK. They are not Schrick Cams ___PTE___

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

12-19-2007, 09:18 PM	#2
baldurann Newbie Join Date: Jun 2007 Posts: 13	Did you have the cams custom ground? If so, who did you have grind them? Thanks!

12-19-2007, 10:56 PM	#4
baldurann Newbie Join Date: Jun 2007 Posts: 13	Damn, was hoping to get pointed in the right direction to get a custom set ground. Thanks, though!

12-24-2007, 09:59 PM	#5
jordanst2 Member Join Date: Jul 2006 Location: Los Angeles, CA Posts: 123 Drives: 1999 e55	what kind of gains can be expected from these?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)