How to install AMG ducktail on my ce ?

SindreVjohnsen · 11-04-2009, 01:44 PM

Hello , I got a amg ducktail,and Im not sure how to install it.
Anyone done this and have some ideas or pics ?
Thanks !

To remove this ad, register today or login if you already are registered!

ZorroAMG · 11-04-2009, 03:13 PM

Does it really fit? The trunk is shaped different on the ce compared to the sedans and so it doesnt usually fit right. If it does, use epoxy or double sided 3M tape.

2PHAST · 11-04-2009, 03:41 PM

Quote:

Originally Posted by ZorroAMG

Does it really fit? The trunk is shaped different on the ce compared to the sedans and so it doesnt usually fit right. If it does, use epoxy or double sided 3M tape.

There are two versions availble, one for the coupe and one for the sedan. So assuming he has the correct version, installation consists of double sided 3m tape and a bead of silicone to seal the outter edges against any moisture getting under the duck tail and loosening the tape.

SindreVjohnsen · 11-04-2009, 04:17 PM

Yeah correct, and I got the one for coupe

ok, so regular 3m dobbel sided tape will hold ? Im kinda scared of the think falling of during driving,that wouldnt be fun for the person behind.
Got the tape on ebay ? or maybee in my local car assesories shop.

And zorro, where you got your fog lights ? looks nice.
Hard to innstal two sets ?

the_widebody · 11-07-2009, 01:58 PM

they were originally installed using high modulus silicone, lathered all over and stuck straight on.

SindreVjohnsen · 11-07-2009, 02:09 PM

Ok , thnx ! I think Il go for a mix of 3m tape end silicone around the edges.
You have the ducktail on yours ?

the_widebody · 11-09-2009, 05:14 AM

yes i have a very early 124 with an original widebody conversion, i have also parted out a number of 124 amg kitted cars.

11-04-2009, 03:13 PM	#2
ZorroAMG MBWorld Fanatic! Join Date: Dec 2002 Location: Vancouver, BC Posts: 3,025 Drives: Enzo, my Benzo	Does it really fit? The trunk is shaped different on the ce compared to the sedans and so it doesnt usually fit right. If it does, use epoxy or double sided 3M tape. __________________

11-04-2009, 04:17 PM	#4
SindreVjohnsen Newbie Join Date: Apr 2009 Location: Norway Posts: 6 Drives: w124 coupe amg look	Yeah correct, and I got the one for coupe ok, so regular 3m dobbel sided tape will hold ? Im kinda scared of the think falling of during driving,that wouldnt be fun for the person behind. Got the tape on ebay ? or maybee in my local car assesories shop. And zorro, where you got your fog lights ? looks nice. Hard to innstal two sets ? __________________ Just a native Norwegian

11-07-2009, 01:58 PM	#5
the_widebody Newbie Join Date: Oct 2009 Posts: 14 Drives: 124 320ce amg widebody twin turbo	they were originally installed using high modulus silicone, lathered all over and stuck straight on. __________________ ce 320 amg widebody twin turbo

11-07-2009, 02:09 PM	#6
SindreVjohnsen Newbie Join Date: Apr 2009 Location: Norway Posts: 6 Drives: w124 coupe amg look	Ok , thnx ! I think Il go for a mix of 3m tape end silicone around the edges. You have the ducktail on yours ? __________________ Just a native Norwegian

11-09-2009, 05:14 AM	#7
the_widebody Newbie Join Date: Oct 2009 Posts: 14 Drives: 124 320ce amg widebody twin turbo	yes i have a very early 124 with an original widebody conversion, i have also parted out a number of 124 amg kitted cars. __________________ ce 320 amg widebody twin turbo

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: