92 400e engine miss - MBWorld.org Forums

		MBWorld.org Forums > Mercedes-Benz Sedans > E-Class (W124)
92 400e engine miss

E-Class (W124) 1984-1995: E 260, E 300, E 320, E 420, E 500 (Includes CE, T, TD models)

Welcome to MBWorld.org!

Welcome to MBWorld,

You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!

LinkBack

Thread Tools

Search this Thread

Rate Thread

Display Modes

11-06-2009, 10:07 AM

patepler

Newbie

Join Date: Nov 2009

Posts: 1

Drives: mb 400e

92 400e engine miss

car will run fine for a while, then about 1200 rpm mill miss and cycle on/off repeatedly (load or no load). it will then clear up and run fine. have original wiring harness. have replaced plugs, fuel filter, caps and buttons. have heard it could be harness, coil, catalytic, maf, eta,. what is most logical for this problem that occurs but is able to clear up after a few minutes? i don't know history of car as was recently purchased>

To remove this ad, register today or login if you already are registered!

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are Off

All times are GMT -4. The time now is 11:40 PM.