|
|
|
|||||||
| Home | Register | Photo Gallery | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read | Used Cars | Vendor Directory |
| S-Class (W126) 1979-1991: 300 SE, 300 SEL, 380 SE, 380 SEL, 420 SEL, 500 SEL, 560 SEL, 360 SEC, 500 SEC, 580 SEC, 300 SD TURBODIESEL, 300 SDL TURBO, 350 SD TURBO, 350 SDL TURBO |
| Welcome to MBWorld.org! |
|
|
Welcome to MBWorld, You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today! |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Rate Thread | Display Modes |
10-21-2009, 01:06 PM
|
#1 | |||
|
Newbie
Join Date: Oct 2009
Posts: 2
Drives: 350 SDL
|
Coil Spring replacement
|
|||
|
|
|
10-26-2009, 09:46 PM
|
#2 |
|
Newbie
Join Date: Oct 2009
Posts: 2
Drives: 350 SDL
|
Not necessary to disconnect
I used an internal type spring compressor and was able to remove and replace the coils without disconnecting the lower ball joint! CV
Last edited by Cherman Veels; 10-26-2009 at 10:32 PM. |
|
|
|
|
| Tags |
| compressor, spring, w126 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
