Just Tinted / Blacked-out My Taillights
04-28-2007, 10:43 PM
#4
MBWorld Fanatic!
Thread Starter
thanks guys...n yUp ..already in the process of lookn for a c/f one...found one on ebay but its AMG... 
...and the other blank c/f ones are ugly and only 2 screws..i def need 4 screws cuz that ****ll jus vibrate like crazy from my subs if its only 2 screws holdin down the plate...
...and the other blank c/f ones are ugly and only 2 screws..i def need 4 screws cuz that ****ll jus vibrate like crazy from my subs if its only 2 screws holdin down the plate...
04-29-2007, 02:01 PM
#6
Senior Member
Join Date: Feb 2007
Location: Sammamish
Posts: 282
Likes: 0
Received 0 Likes
on
0 Posts
'02 CLK55
What did you use? I just got some of the VS Nightshade tint and was going to give it a try. I have seen some people wet sand, spray spray spray and then clear clear. Then wet sand with 1000 grit and 1500. Then I see some have just cleaned and removed any wax and painted then clear coat.
Trending Topics
04-29-2007, 04:52 PM
#9
MBWorld Fanatic!
Looks great man - I rellay like how you blacked out even the red. Please tell us what product / process you used. Slick, slick, slick. 
04-29-2007, 05:21 PM
#10
MBWorld Fanatic!
Thread Starter
thanks every1.....
the product is VHT Niteshades...took about 2 n half hrs to remove taillights, tint n clearcoat em n put em back in.....basically..jus covered up the white part with tape and then sprayed away....make sure u spray for at least a good foot away for each coating or else it bunches together and runs...n if it does...DO NOT use a paper towel...youll get mad lint (my initial mistakes)....i probably put about 10 layers all together even tho it says dont put more than 3 cuz the light might not shine thru lol.....but i tested it as i was doin it n the taillights are obviously still shinin thru...n i wanted it black...not like dark red....just let it try after each coat or tint.....after ur totally dun tintin....take off tape off the covered part and then clearcoat the whole taillight with a few coats....then just let dry and put ur tails bak in!...
this is where i ordered from...$22 shipped with clearcoat
http://www.neverenoughauto.com/catal...999-p1831.html
the product is VHT Niteshades...took about 2 n half hrs to remove taillights, tint n clearcoat em n put em back in.....basically..jus covered up the white part with tape and then sprayed away....make sure u spray for at least a good foot away for each coating or else it bunches together and runs...n if it does...DO NOT use a paper towel...youll get mad lint (my initial mistakes)....i probably put about 10 layers all together even tho it says dont put more than 3 cuz the light might not shine thru lol.....but i tested it as i was doin it n the taillights are obviously still shinin thru...n i wanted it black...not like dark red....just let it try after each coat or tint.....after ur totally dun tintin....take off tape off the covered part and then clearcoat the whole taillight with a few coats....then just let dry and put ur tails bak in!...
this is where i ordered from...$22 shipped with clearcoat
http://www.neverenoughauto.com/catal...999-p1831.html
Last edited by deyainrdy4ds; 04-29-2007 at 05:26 PM.
04-29-2007, 07:20 PM
#14
MBWorld Fanatic!
Thread Starter
first of all ..DIk....as ive stated in other threads earlier that all that AMG **** was there already wen i purchased the car....and its all guna b gone once i send my car in for its bodywork...im obviously not tryna pose ta ANYONe...every1 knows i have a 430
2nd of all...can i c ur car....u seem ta always hav smart comments bout ppls cars n mods....
SoCalw11w123 - thanks for expressin ur opinion on the tails in at least a respectful manner unlike sum otha fkers on here ...i kno sum ppl mite not like it cuz it looks a lil ricey but it works well wit my blak wheels setup and my future mods....the red was the only color part left in the car n i jus wanted ta get rid of it...
2nd of all...can i c ur car....u seem ta always hav smart comments bout ppls cars n mods....
SoCalw11w123 - thanks for expressin ur opinion on the tails in at least a respectful manner unlike sum otha fkers on here
...i kno sum ppl mite not like it cuz it looks a lil ricey but it works well wit my blak wheels setup and my future mods....the red was the only color part left in the car n i jus wanted ta get rid of it...
Last edited by deyainrdy4ds; 04-29-2007 at 07:24 PM.
04-29-2007, 09:59 PM
#16
MBWorld Fanatic!
Thread Starter
lol...aint no1 hurt...i don relly c ur justification for the 'grade skool grl' **** but wateva u say.......i aint relly bout beefn ova the internet so jus do u n ill jus b here listnin til u relly got somtin ta say....
stil waitin on them pics btw...
n wut u kno bout jerz....
Last edited by deyainrdy4ds; 04-29-2007 at 10:03 PM.
04-29-2007, 10:20 PM
#17
Senior Member
Join Date: Feb 2007
Location: Florida, Tampa
Posts: 449
Likes: 0
Received 0 Likes
on
0 Posts
1993 190E 2.6
Tails look clean. Not ricey, Clean.
When you put on the new badges paint them black too. Might look really good. I have a white benz with black badges. It came out pretty nice. I think.
Exhaust looks mean.
Ill have to stop by this area more often.
When you put on the new badges paint them black too. Might look really good. I have a white benz with black badges. It came out pretty nice. I think.
Exhaust looks mean.
Ill have to stop by this area more often.
04-30-2007, 09:13 AM
#20
MBWorld Fanatic!
F**ken sick, as we say in cali totaly nar-nar! I so want to do it just don't know if it'll flow with mine. Had a totaly blacked out volvo and loved it. As for the jerkoffs how gives a **** what they say as long as you like it cause its your ride!
05-01-2007, 05:25 PM
#23
MBWorld Fanatic!
Thread Starter
yo i jus responded on benzworld....i guess ill b down ta do it but jus know that it isnt like a perfect professional job that i did....if u look closely the edges aint perfect n all but still looks good in general...up ta u...ill take more up close pics and higher resolution pics if u want......and im sure ill b able ta do it better the 2nd time around...let me know
05-01-2007, 05:29 PM
#24
Super Member
Join Date: Apr 2006
Location: Somewhere in Maryland
Posts: 555
Likes: 0
Received 0 Likes
on
0 Posts
2000 CLK 430 Cabriolet
Nice Hersh! Matte black badging is def an idea tho. Or just go 'naked' on the trunk.
I feel you on the AMG badges. Mine came with a AMG on the rightside of the trunk but I haven't taken it off. Still deciding if I'm going to take it off or not. Don't really care what ANYBODY thinks if I'm rollin a 430 and just happens to have a AMG badge on it that I'm not responsible for mounting. But you're previous owner looks like he went crazy! AMG sticker in the window, license plate frame, trunk badging in addition to the '55'.
I feel you on the AMG badges. Mine came with a AMG on the rightside of the trunk but I haven't taken it off. Still deciding if I'm going to take it off or not. Don't really care what ANYBODY thinks if I'm rollin a 430 and just happens to have a AMG badge on it that I'm not responsible for mounting. But you're previous owner looks like he went crazy! AMG sticker in the window, license plate frame, trunk badging in addition to the '55'.
