DPE Engineering Forged 2 piece
#1
Senior Member
Thread Starter
Join Date: Mar 2007
Location: Los Angeles
Posts: 315
Likes: 0
Received 0 Likes
on
0 Posts
CLS
DPE Engineering Forged 2 piece
For Sale
DPE Engineering 2 piece RO7 Variant S Reverse lip wheels set of 4.
W210
W211
Fronts are 19x8's
Rears are 19x10's
The tires I had on them were 235-35's front 265-30's rear.
I had the H&R Race cup kit on this car with #1 pads. No rubbing front or rear. After the front springs settled after 6 months the front tires would rub just slightly turning into driveways. Mind you that my set up was slammed. If you are running a Sport H&R spring or Eibach with anything taller than a #1 pads you will have no problems with these wheels. Again, they were made for the E Class. Just trying to help anyone who is interested in these wheels understand my set up and know they will work.
Were offset specific custom made for the E series.
I don't know what other Benzes these will fit.
Wheel caps included are HRE's. The guy I bought them from didn't have any DPE caps when I bought them a year ago so he gave me these caps. The good: the crooks know the difference. The rest of the world thinks you have HRE wheels. These wheels are around $950 bucks new each.
Chrome lugs are included also specific for the E class.
http://www.vividracing.com/catalog/p...ducts_id/19188
Condition:
Really nice. I'd say 8.5's out of 10's in condition.
They are perfect and spin true.
Cosmetically there is one small nick that is almost completely covered by the tire on one of the fronts. A very tiny bend about an inch long on the rear. Some light curb rash that otherwise can be polished out easily. Actually, if they were polished there would be zero curb rash, its that light.
The wheels are dirty in the pics. They polish up brilliant. The reflection from the sun actually hurts your eyes ithey are so bright. I'm really picky and **** so they are probably in better condition than I described.
If you want a real, forged, high quality wheel along the lines of an HRE wheel for cheap you can't go wrong with this set.
$ 1,800.
Thanks, e-mail is Mr1of1@aol.com
DPE Engineering 2 piece RO7 Variant S Reverse lip wheels set of 4.
W210
W211
Fronts are 19x8's
Rears are 19x10's
The tires I had on them were 235-35's front 265-30's rear.
I had the H&R Race cup kit on this car with #1 pads. No rubbing front or rear. After the front springs settled after 6 months the front tires would rub just slightly turning into driveways. Mind you that my set up was slammed. If you are running a Sport H&R spring or Eibach with anything taller than a #1 pads you will have no problems with these wheels. Again, they were made for the E Class. Just trying to help anyone who is interested in these wheels understand my set up and know they will work.
Were offset specific custom made for the E series.
I don't know what other Benzes these will fit.
Wheel caps included are HRE's. The guy I bought them from didn't have any DPE caps when I bought them a year ago so he gave me these caps. The good: the crooks know the difference. The rest of the world thinks you have HRE wheels. These wheels are around $950 bucks new each.
Chrome lugs are included also specific for the E class.
http://www.vividracing.com/catalog/p...ducts_id/19188
Condition:
Really nice. I'd say 8.5's out of 10's in condition.
They are perfect and spin true.
Cosmetically there is one small nick that is almost completely covered by the tire on one of the fronts. A very tiny bend about an inch long on the rear. Some light curb rash that otherwise can be polished out easily. Actually, if they were polished there would be zero curb rash, its that light.
The wheels are dirty in the pics. They polish up brilliant. The reflection from the sun actually hurts your eyes ithey are so bright. I'm really picky and **** so they are probably in better condition than I described.
If you want a real, forged, high quality wheel along the lines of an HRE wheel for cheap you can't go wrong with this set.
$ 1,800.
Thanks, e-mail is Mr1of1@aol.com
Last edited by Esleeper; 11-26-2007 at 01:29 AM.
#5
MBWorld Fanatic!
Join Date: Mar 2003
Location: SFV, SoCal
Posts: 5,544
Likes: 0
Received 1 Like
on
1 Post
'04 Silverado Z71 - sold all my Benzes and need another!
I can agree with sleeper on these wheels, they are bad a$$! I have the R08 version of these wheels in brushed and they clear my AMG brakes. Oh and by the way, I even have a 5mm spacer up front and no rub because my fenders are factory rolled. Roll your fenders and you'll never rub. Free bump!
By the way, are these high polished or full chrome??? Hard to tell from the pics and you didn't specify...
By the way, are these high polished or full chrome??? Hard to tell from the pics and you didn't specify...
#6
MBWorld Fanatic!
Join Date: Feb 2007
Location: Los Angeles
Posts: 1,398
Likes: 0
Received 1 Like
on
1 Post
2000 CLK 3.2
I can agree with sleeper on these wheels, they are bad a$$! I have the R08 version of these wheels in brushed and they clear my AMG brakes. Oh and by the way, I even have a 5mm spacer up front and no rub because my fenders are factory rolled. Roll your fenders and you'll never rub. Free bump!
By the way, are these high polished or full chrome??? Hard to tell from the pics and you didn't specify...
By the way, are these high polished or full chrome??? Hard to tell from the pics and you didn't specify...
Trending Topics
#16
Senior Member
Thread Starter
Join Date: Mar 2007
Location: Los Angeles
Posts: 315
Likes: 0
Received 0 Likes
on
0 Posts
CLS
#17
Senior Member
Thread Starter
Join Date: Mar 2007
Location: Los Angeles
Posts: 315
Likes: 0
Received 0 Likes
on
0 Posts
CLS
#18
Senior Member
Thread Starter
Join Date: Mar 2007
Location: Los Angeles
Posts: 315
Likes: 0
Received 0 Likes
on
0 Posts
CLS
Oh yea,
I forgot to mention I have the chome lugs that work with these wheels that go with the wheels. The stock lugs will not work.
I forgot to mention I have the chome lugs that work with these wheels that go with the wheels. The stock lugs will not work.
Last edited by Esleeper; 12-03-2007 at 01:24 PM.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)