IForged Wheels for Sale

zackcamp · 09-25-2009, 07:52 AM

Hey guys...
I didn't see a classified section, so I figured I would post here to see if it sparked any interest.

I bought this set of wheels a while back. The previous owner had told me they were built for W203 C-Class (IForged does not print wheel offsets on their wheels, they create every set of wheel specific for the car it is going on) but ensured me they would fit my car (2003 Audi A4 Avant). Long story short, they WILL fit on the Audi, but with heavy camber adjustments, that just will not do for daily driving.

As far as credit goes, I am an avid poster and seller on the classifieds of vwvortex.com (ZackinIRAQ) and audizine.com (zackcamp)

Here are the details, if you are interested or have any questions feel free to email me at zodiac383@cox.net.

5x112
19x8.5(f) and 19x9.5(r)
$2300 shipped anywhere CONUS.
Mercedes W203 C-Class Fitment
IForged does not release offset information, as each set of wheels are custom made. However, I attempted to manually calculate the offsets and concluded that the offsets most likely in the range of ET25 up front, and ET41 in the rear. If you would like the pictures we used to calculate the offsets please let me know.
PERFECT condition. Wheels were recently refinished and have not been mounted since. Centers were painted in custom gunmetal grey with freshly polished lips. Wheels will come with chrome lug bolts and brand new center caps.

To remove this ad, register today or login if you already are registered!

hyper_tune77 · 09-25-2009, 09:41 AM

Hi mate,

Not to rain on your parade, but Azn_C300 is selling his iForged for $2200 WITH tires and it almost brand new! .. & moreover, you bought your wheels in used condition.. it certainly helps if you reduce the price..

Good luck with your sales.. nice wheels though..

Zack

zackcamp · 09-25-2009, 11:34 AM

Thanks for the suggestion. New the wheels are over 4g, and I purchased for 2200 prior to refinishing. Just trying to get close to what I paid and invested in them. I'll consider lowering the price eventually, but for now I am in no rush to sell. Worst case scenario I will just run them for shows. I wish I could run them all the time.

Ammi · 09-26-2009, 11:03 AM

Quote:

Originally Posted by hyper_tune77

Hi mate,

Not to rain on your parade, but Azn_C300 is selling his iForged for $2200 WITH tires and it almost brand new! .. & moreover, you bought your wheels in used condition.. it certainly helps if you reduce the price..

Good luck with your sales.. nice wheels though..

Zack

yea well I rather pay a bit extra and buy OP's set which IMO, looks lot better

phister · 09-27-2009, 05:15 AM

dam if i only had the money I'd hop on these ASAP... GL with the sale

zackcamp · 09-27-2009, 07:35 AM

thanks!

Still for sale for now. I have additional pictures if anyone would like them.

Ammi · 09-27-2009, 08:37 PM

wonder if these would fit e55

emoving · 09-27-2009, 09:00 PM

Quote:

Originally Posted by Ammi

wonder if these would fit e55

Ahhh! No

rdscklasse · 09-28-2009, 11:32 AM

Ahhh! Why?

If the offsets are correct, it will. Maybe a spacer in the back. . .

zackcamp · 09-28-2009, 03:19 PM

Im not familiar with mercedes offsets. If anyone needs any additional pictures though please let me know.

Karo · 09-29-2009, 05:01 AM

This rims look hot. 2300 is a great price..wait for the right fish to bite. I'm sure you can easily sell them for 2300 no doubt.

Good luck with the sale

zackcamp · 09-29-2009, 06:56 AM

Quote:

Originally Posted by Karo

This rims look hot. 2300 is a great price..wait for the right fish to bite. I'm sure you can easily sell them for 2300 no doubt.

Good luck with the sale

Thanks a lot man.

zackcamp · 10-03-2009, 07:20 AM

Bump. Anyone interested?

Uncleruckus34 · 10-06-2009, 01:58 AM

fit a c63?

zackcamp · 10-06-2009, 02:55 AM

Quote:

Originally Posted by Uncleruckus34

fit a c63?

I don't know much about Mercedes wheel fitments. If you get me the current width and offset of yours wheels I can let you know if they will fit.

zackcamp · 10-11-2009, 09:24 AM

Give these wheels a chance to shine.

zackcamp · 10-18-2009, 06:20 PM

To the Tizzle.

zackcamp · 10-22-2009, 09:09 AM

These things have sat in their boxes for way too long.

infected · 10-22-2009, 06:05 PM

Anyone know how to confirm the offsets either from iForged or another source?

zackcamp · 10-22-2009, 06:53 PM

Quote:

Originally Posted by infected

Anyone know how to confirm the offsets either from iForged or another source?

I have pictures of measurements for each wheel that will allow you to determine offset on your own, as long as you know how to do it.

maxwerks · 10-22-2009, 07:55 PM

Quote:

Originally Posted by zackcamp

I have pictures of measurements for each wheel that will allow you to determine offset on your own, as long as you know how to do it.

I am not sure what the pictures show exactly, there is a way to tell and calculate but you have to make up for the lip of the wheels itself and be absolutely perpendicular to the hub part of the wheel .. remember 8.5 wheel measure 9.5. the 9.5 measures 10.5...also , it is best to measure to the hub with a wood piece and then measure that flat with a ruler with a metric scale ,
to take that measurement with a tape measure will be less accurate.
Just my 2c

infected · 10-23-2009, 01:04 AM

Did you purchase the wheels from someone on this board? Username?

zackcamp · 10-23-2009, 01:46 AM

Quote:

Originally Posted by infected

Did you purchase the wheels from someone on this board? Username?

Purchased the wheels on audizine.

infected · 10-23-2009, 05:05 AM

Thanks. Sent you an email.

zackcamp · 10-23-2009, 06:22 AM

Quote:

Originally Posted by maxwerks

I am not sure what the pictures show exactly, there is a way to tell and calculate but you have to make up for the lip of the wheels itself and be absolutely perpendicular to the hub part of the wheel .. remember 8.5 wheel measure 9.5. the 9.5 measures 10.5...also , it is best to measure to the hub with a wood piece and then measure that flat with a ruler with a metric scale ,
to take that measurement with a tape measure will be less accurate.
Just my 2c

Si, that is exactly what I did, thanks

Pics sent infected. If anyone else wants them please let me know.

09-28-2009, 11:32 AM	#9
rdscklasse Member Join Date: Feb 2007 Location: Mission Viejo, CA (Orange County) Posts: 222 Drives: 06 E350 w/ E55 AMG body kit, AMG Brakes & more to come. . . C230KSS Gone!	Ahhh! Why? If the offsets are correct, it will. Maybe a spacer in the back. . . __________________ rdscklasse a.k.a. rdsbenz rdscklasse a.k.a. rdsbenz (mymbonline.com)

09-29-2009, 05:01 AM	#11
Karo MBWorld Fanatic! Join Date: Feb 2009 Location: SoCal - Los Angeles Posts: 1,744 Drives: 2006 C350 SS	This rims look hot. 2300 is a great price..wait for the right fish to bite. I'm sure you can easily sell them for 2300 no doubt. Good luck with the sale __________________

10-22-2009, 06:05 PM	#19
infected Super Member Join Date: Nov 2005 Location: Calgary Alberta Posts: 749 Drives: CL203	Anyone know how to confirm the offsets either from iForged or another source? __________________

10-23-2009, 01:04 AM	#22
infected Super Member Join Date: Nov 2005 Location: Calgary Alberta Posts: 749 Drives: CL203	Did you purchase the wheels from someone on this board? Username? __________________

10-23-2009, 05:05 AM	#24
infected Super Member Join Date: Nov 2005 Location: Calgary Alberta Posts: 749 Drives: CL203	Thanks. Sent you an email. __________________

09-25-2009, 09:41 AM	#2
hyper_tune77 Member Join Date: Jan 2009 Location: Helsinki, Finland Posts: 86 Drives: 2006 mercedes benz C180k Avantgarde SE	Hi mate, Not to rain on your parade, but Azn_C300 is selling his iForged for $2200 WITH tires and it almost brand new! .. & moreover, you bought your wheels in used condition.. it certainly helps if you reduce the price.. Good luck with your sales.. nice wheels though.. Zack

09-25-2009, 11:34 AM	#3
zackcamp Newbie Join Date: Sep 2009 Posts: 13 Drives: 91 VW GTI VR6-t, 03 Audi A4 Avant Quattro	Thanks for the suggestion. New the wheels are over 4g, and I purchased for 2200 prior to refinishing. Just trying to get close to what I paid and invested in them. I'll consider lowering the price eventually, but for now I am in no rush to sell. Worst case scenario I will just run them for shows. I wish I could run them all the time.

09-27-2009, 05:15 AM	#5
phister Member Join Date: Feb 2009 Location: fort worth, tx Posts: 80 Drives: 06 C230 SS 6spd MT	dam if i only had the money I'd hop on these ASAP... GL with the sale

09-27-2009, 07:35 AM	#6
zackcamp Newbie Join Date: Sep 2009 Posts: 13 Drives: 91 VW GTI VR6-t, 03 Audi A4 Avant Quattro	thanks! Still for sale for now. I have additional pictures if anyone would like them.

09-27-2009, 08:37 PM	#7
Ammi Member Join Date: Sep 2008 Posts: 182 Drives: W211 E55	wonder if these would fit e55

09-28-2009, 03:19 PM	#10
zackcamp Newbie Join Date: Sep 2009 Posts: 13 Drives: 91 VW GTI VR6-t, 03 Audi A4 Avant Quattro	Im not familiar with mercedes offsets. If anyone needs any additional pictures though please let me know.

10-03-2009, 07:20 AM	#13
zackcamp Newbie Join Date: Sep 2009 Posts: 13 Drives: 91 VW GTI VR6-t, 03 Audi A4 Avant Quattro	Bump. Anyone interested?

10-06-2009, 01:58 AM	#14
Uncleruckus34 Newbie Join Date: May 2009 Location: Miami, FL Posts: 10 Drives: 09 Arctic White C63 AMG	fit a c63?

10-11-2009, 09:24 AM	#16
zackcamp Newbie Join Date: Sep 2009 Posts: 13 Drives: 91 VW GTI VR6-t, 03 Audi A4 Avant Quattro	Give these wheels a chance to shine.

10-18-2009, 06:20 PM	#17
zackcamp Newbie Join Date: Sep 2009 Posts: 13 Drives: 91 VW GTI VR6-t, 03 Audi A4 Avant Quattro	To the Tizzle.

10-22-2009, 09:09 AM	#18
zackcamp Newbie Join Date: Sep 2009 Posts: 13 Drives: 91 VW GTI VR6-t, 03 Audi A4 Avant Quattro	These things have sat in their boxes for way too long.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread: